- Main page
- Projects
- Car-passenger ferries
- Car-and-passenger ferry class “O2,0 (ice30) A” project 2967/3132
Car-and-passenger ferry class “O2,0 (ice30) A” project 2967/3132
| Main dimensions, m | |
| length according to design waterline | 37,01 |
| length overall | ca.40,50 |
| breadth according to design waterline | 9,07 |
| breadth overall | 12,16 |
| amidships height, m | 3,30 |
| air draught for fixed parts, m | 8,50 |
| Draft, m | |
| light | 1,22 |
| full-load | 1,69 |
| Powerplant | |
| number and power of motor drives, kW | 2x220 |
| Displacement, t: | |
| light | 244 |
| full-load | 373 |
| Rate of sailing, km/h, not less than | 18 |
| Passenger capacity (people) | 100 |
| Crew seats | 3 |
| Number of transported vehicles: | |
| three-axle KAMAZ dump truck without cargo, weighing 10400 kg or | 8 |
| middle class passenger car, weighing 2000 kg | 16 |
Self-propelled twin-shaft car-and-passenger ferry with folding two-section bow and stern ramps for wheeled vehicles and passengers, a forecastle on the right and left sides outside the width of the bow ramp, elevated platforms at the sides in the aft part of the deck, a short two-tier U-shaped (for passage wheeled vehicles) superstructure in the middle part of the length, an open deck without camber and sheer in the rest of the length of the vessel, a wheelhouse from side to side on the roof of the superstructure, three passenger saloons in the hold, separated by a watertight transverse bulkhead and a permeable bulkhead in the center plane, two diesel main engines and aft location of the engine room.
ADDITIONAL DATA:
- to ensure the entry and exit of wheeled vehicles onto the main deck of the vessel, lifting ramps with an electromechanical drive are installed in the bow and stern of the vessel;
- to accommodate passengers on the ship, there are three hold saloons equipped with seats, a bathroom with a toilet and a washbasin;
- there is a room for heating and eating food, a clothing room with a dryer, a shower and toilet room for the crew.
